eBay Classifieds » All ads » For sale » Business & industrial » 

lathe in Hudson Valley

(0 ad found)

Categories
Price [clear]
$ to
    Ads

    Sorry, but no ads matched your search for "lathe" in your area.

    Be the first to get new results like these -

    Can't find what you are looking for in your area? See more ads from nearby cities.

    1. Warner & Swasey #3A Turret Lathe * 6 1/4" Spindle Hole With DRO's!

      Warner & Swasey #3A Turret Lathe, 6 1/4" Spindle Hole w/ DROs New 1958 ***VIDEO AVAILABLE*** Specifications: Swing over Bed 23- 1/2" Swing over Cross Slide 18" Bar Capacity, Round 6" Maximum Length Turned 43" Chuck Size 21" Distance, Spindle Nose to Turret Face 59" Spindle Speeds (16) 24 to 851 RPM Motor 20/40HP 440 Volt Carriage Long. Feeds (16) .005 to .167 IPR Long. Feeds of Cross Slide ...

    2. 2008 Haas TL 3 (CNC Engine Lathe)

      2008 Haas TL 3 CNC Engine Lathe Control: Haas Swing Over Bed: 20" Swing Over Cross Slide: 13" Distance Between Centers: 60" Max Cutting Diameter: 20" X Axis Travel: 12" Z Axis Travel: 60" Spindle Nose: A2-6 Spindle Bore: 3.5" Spindle Speed: 1,800 RPM Spindle Motor: 18 HP Machine Dimensions: 123"L x 77"W x 87"H Machine Weight: 7,000 LBS More Info: http://2spade.com/2008HaasTL3.html

    3. 2000 Mazak M5 CNC Flat Bed Lathe

      ***VIDEO AVAILABLE*** SPECIFICATIONS: Two Chuck Size 22" Max Diameter Bar Capacity 7.1" Max Swing Over Bed / Carriage 24" / 13" Max Turning Diameter 13.75" Distance Between Centers 81.9" Spindle Motor 30 / 25 HP AC Spindle Speed 2 - 1000 RPM Spindle Bore 7.1" Spindle Nose A2-15 Spindle Torque 868 ft. lbs. Tools 8 Front OD + 6 Rear ID Rapid Traverse Rates (X & Z) 394 IPM X-Axis ...

    4. GRAY 60" RINGMASTER VERTICAL TURRET LATHE * LIKE NEW!

      ***MACHINE COMPLETELY REMANUFACTURED AND RETROFIT IN 2005 BY DANILUK CORP. COMES FROM U.S. AIR FORCE SURPLUS AND SHOWS LIKE NEW! ***VIDEO AVAILABLE*** SPECIFICATIONS: TABLE DIAMETER: 60" (4-JAW CHUCK) MAXIMUM SWING: 68" MAXIMUM HEIGHT UNDER RAIL: 60" MAXIMUM HEIGHT UNDER RAM TOOL BLOCK: 54" VERTICAL RAM TRAVEL BELOW CROSS RAIL: 36" SMALLEST HOLE RAM AND TOOL BLOCK WILL ENTER: 11" ...

    5. IKEGAI DA-25 GEARED HEAD GAP BED ENGINE LATHE

      IKEGAI DA-25 GEARED HEAD GAP BED ENGINE LATHE Brand: IKEGAI Model: DA-25 Type: Gap Lathes Year: 1966 Location: Ohio Description: 15'' 3 JAW CHUCK, 2 1/4'' BORE 24'' X 80'' CC 24" Swing In Gap Price: $8500.00 F.O.B. OH IN GOOD RUNNING CONDITION!

    6. 34"/42" X 120" KINGSTON HR3000 ENGINE LATHE

      34"/42" X 120" KINGSTON HR3000 ENGINE LATHE DESCRIPTION: SWING OVER BED: 34" DISTANCE BETWEEN CENTERS: 120" EQUIPPED WITH: 24" 4-JAW CHUCK STEADY REST FOLLOW REST 4 WAY TOOL HOLDER PRICE: $15,500 BEFORE REMOVAL!! LOCATION: WEST COAST

    7. 30" X 120" KINGSTON HK3000 HOLLOW SPINDLE ENGINE LATHE

      30" X 120" KINGSTON HK3000 HOLLOW SPINDLE ENGINE LATHE NEW 1984 *FRONT & REAR CHUCKS * 12.5" HOLE * TAPER ATTACHMENT* ***LATHE IS IN EXCEPTIONALLY NICE CONDITION!*** ***VIDEO AVAILABLE*** SPECIFICATIONS: SWING OVER BED................................. 30" SWING OVER CROSS SLIDE................ 20-3/4" SPINDLE NOSE CAMLOCK................... A2-20 HOLE THROUGH SPINDLE................... 12 ...

    8. 2006 Haas TL-3 CNC Toolroom Lathe * Like New!  Less Than 2000 Hours!

      2006 Haas TL-3 CNC Toolroom Lathe * Beautiful Machine! Pristine Machine With**1965 Spindle Hours on 2/14/2014**!!!!!!! Specification: Control Haas 32bit CNC Chuck Size 12" Max Swing 20" Max Swing Over Cross Slide 13" Max Between Centers 60" Max Cutting Length 60" X-Axis Travel 12" Z-Axis Travel 60" Max Spindle Speed 1800 RPM Spindle Nose A2-6 Spindle Bore 3.50" Rapids X/Z 75 IPM/ 150 IPM ...

    9. 1955 Bullard MAN-AU-TROL 54 (Manual Vertical Turret Lathe)

      1955 Bullard MAN-AU-TROL 54 Manual Vertical Turret Lathe Model: #75 Table Diameter: 54" Max Swing (W/O Side Head): 62" Max Swing (With Side Head): 58" Max Height Under Rail: 44" Rail Adjustment: 32" Table Speeds: 3.3 - 120 RPM Table Height: 36" Table Motor: 30 HP Machine Dimensions: 180"L x 115"W x 132"H Machine Weight: 60,000 LBS -EQUIPPED WITH- Turret Side Head Pendant Control More ...

    10. GEMINIS GE-870 Gap-Bed Geared Head Engine Lathe * 37"/43" x 78" Rare!

      ***LARGE SWING * SHORT CENTERS * RARE HEAVY DUTY LATHE!*** Specifications: Swing Over Bed: ................................................................................. 37.3" (870mm) Swing Over Gap: ................................................................................. 43.3"(1100mm) Swing Over Cross Slide:...................................................................... ...

    11. LODGE & SHIPLEY AVS "Heavy Duty" 26 X 80" Lathe * SUPERB CONDITION!

      LODGE & SHIPLEY AVS "Heavy Duty" 26 X 80" Lathe ***MACHINE IS ALMOST NEW FROM GOVERNMENT STORAGE*** ***VIDEO AVAILABLE*** SPECIFICATIONS: Swing over bed: 26” Swing over cross slide: 18.25” Max distance between centers: 80” Spindle nose: D1-6 Spindle bore: 2” Spindle speeds: (3 ranges, infinitely variable speeds within ranges) 25 to 200, 185 to ...

    12. Toolmex Model TUR-630AMN/118 * 2 Axis Flat Bed 24" x 120" CNC Lathe

      NEW 2010 *Front and Rear Chucks* SPECIFICATIONS: Swing Over Bed: 24" Swing Over Cross Slide: 14.6" Distance Between Centers: 120" Spindle Bore: 5.5" Spindle Speeds (21): 15-1400 RPM Motor: 20 HP Tool ...

    13. Mazak QT-35N-U CNC Turning Center * Very Nice CNC Lathe for Your Shop!

      Mazak QT-35N-U CNC Turning Center Specifications: Swing over bed: 20.08" Max. turning dia.: 15.75" Max. machining length: 41.02" Chuck: 8" collet Spindle speeds: 30 - 3000 RPM Spindle motor: 40 / 30 HP Tailstock taper: MT 5 Equipped with: Mazatrol T32 CNC control 12 position tool turret 8" collet chuck with 3" bar capacity Price: $24,500.00 In Very Good Condition Prior To Removal.

    14. 1958 Warner & Swasey #3A Turret Lathe * 6 1/4" Spindle Hole * DRO's

      ***Saddle Type Turret Lathe*** ***VIDEO AVAILABLE*** Specifications: Swing over Bed 23- 1/2" Swing over Cross Slide 18" Bar Capacity, Round 6" Maximum Length Turned 43" Chuck Size 21" Distance, Spindle Nose to Turret Face 59" Spindle Speeds (16) 24 to 851 RPM Motor 20/40HP 440 Volt Carriage Long. Feeds (16) .005 to .167 IPR Long. Feeds of Cross Slide .005 to .167 IPR Cross Feed of Cross ...

    15. 1997 POREBA GAB BED HOLLOW SPINDLE ENGINE LATHE * NICE!

      POREBA GAB BED HOLLOW SPINDLE ENGINE LATHE Model -TRP-93D 320mm x 3M ***FRONT & REAR CHUCKS*** SPECIFICATIONS: Maximum Swing Over Bed ways 36.6" Maximum Swing Over Carriage 24.8" Maximum Swing In Gap 45.2" Spindle Hole 12.59" Distance Between Centers 118" Spindle Speeds ...

    16. 34” x 100” BROADBENT Oil County Lathe with 16-1/4” Hole thru the Spind

      34” x 100” BROADBENT Oil County Lathe with 16-1/4” Hole thru the Spindle and Automatic Threading. New 1980 SPECIFICATIONS: 34” Swing Over Bed ways 20” Swing Over Cross Slide 56” Swing In Removable Gap 16.25” Spindle thru Hole Spindle Speeds from 4 to 350 RPM Inch / Metric Threading Air Kick out for Threading EQUIPPED WITH: 30” Diameter Front Mounted 4-Jaw Chuck Taper Turning Attachment 2 ...

    17. 46" x 276" LEBLOND ENGINE LATHE * RUNS EXCELLENT!

      46" x 276" LEBLOND ENGINE LATHE MODEL 4025NK-32 NEW: 1966 ***VIDEO AVAILABLE*** SPECIFICATIONS: SWING OVER BED WAYS ................. 46" SWING OVER CROSS SLIDE .............. 32" SPINDLE NOSE ........................ L-3 SPINDLE HOLE ........................ 3-1/16" DISTANCE BETWEEN CENTERS ............ 276" WIDTH OF BED ........................ 34" SPINDLE SPEED RANGE (36) ............ ...

    18. 46" x 108" LEBLOND ENGINE LATHE * EXCELLENT MACHINE!

      46" x 108" LEBLOND ENGINE LATHE MODEL: 4628 NEW: 1971 ***VIDEO AVAILABLE*** SPECIFICATIONS: SWING OVER BED WAYS ................. 46-1/2" SWING OVER CROSS SLIDE .............. 28-1/2" SPINDLE HOLE ........................ 3-1/16" DISTANCE BETWEEN CENTERS ............ 108" WIDTH OF BED ........................ 41-7/8" SPINDLE SPEED RANGE.................. .5 - 300 RPM FEED RANGE (48) ..... ...

    19. 34" X 60" MONARCH MODEL 32NN HEAVY DUTY ENGINE LATHE * NICE!

      ***PRICE REDUCED FROM $39,500.00 TO $29,500.00!!!*** SPECIFICATIONS: MAXIMUM SWING OVER BED: 34.5" MAXIMUM SWING OVER CROSS SLIDE: 18" DISTANCE BETWEEN CENTERS: 60" SPINDLE SPEEDS: (16) 6 TO 303 RPM SPINDLE HOLE: 2-3/16" SPINDLE NOSE: D-1-11" THREADS: (48) 1 TO 56 TPI FEEDS: (48) .006" TO .363" PER REV TAILSTOCK SPINDLE DIAMETER: 4-7/8" TAILSTOCK SPINDLE TRAVEL: 13" TAILSTOCK ...

    20. 1983 HARDINGE HLV-H PRECISION TOOLROOM LATHE * VERY NICE!

      1983 HARDINGE HLV-H PRECISION TOOLROOM LATHE SPECIFICATIONS SWING OVER BED: 11" SWING OVER CARRIAGE EDGE: 9" SWING OVER CROSS SLIDE: 6-1/2" DISTANCE BETWEEN CENTERS: 18" SPINDLE MOUNT ...

    21. 1968 Bullard DYNATROL 76 (Vertical Turret Lathe)

      1968 Bullard DYNATROL 76 Vertical Turret Lathe Table Size: 76" Maximum Swing: 88" Ram Travel Horizontal: 48-1/2" Minimum Hole Size Ram Will Go In: 9-1/2" Side Head Travel In & Out: 40" Table Speed: 4 To 150 RPM Feeds Fine: .002 To .100 IPM Fine Course: .080 To .500 IPM Rapids Traverse: 120 IPM Main Motor: 60 HP Machine Weight: 85,000 LBS Floor Space: 188" L X 137" W -EQUIPPED WITH- High ...

    22. 2012 Haas TL-3B Big Bore CNC Flat Bed Lathe In Excellent Condition!

      Specifications: Chuck Size: (2) 25" Manual Chucks Max. Swing Over Bed/Cross Slide 30" / 18.5" Max. Cutting Diameter 30" Max. Machining Length 60" X-Axis Travel 16" Z-Axis Travel 60" Spindle Motor 30 HP Spindle Speed-2 speed Geared 650 RPM Spindle Nose / Spindle Bore A2-15" / 8.5" Turret Type-optional Tool Post Rapid Traverse Rates X / Z 75 IPM / 150 IPM Tailstock Center - Optional: ...

    23. 48" x 78" LOMBARDO HEAVY-DUTY ENGINE LATHE * RUNS STRONG!

      1966 - 48" x 78 LOMBARDO "HEAVY DUTY" Engine Lathe SF1200 With: 39" 4-Jaw, 48.8" Actual Swing, 28" Swing Over The Cross-Slide, 2.75" Spindle Bore and Inch/Metric/Whitworth Threading. 48" x 78" LOMBARDO HEAVY-DUTY ENGINE LATHE MODEL SF-1200 ***VIDEO AVAILABLE*** CATALOGUE SPECIFICATIONS: Hole Thru Spindle........................ 2.75" Swing Over Bed Ways...................... 48" Swing ...

    24. WARNER & SWASEY 4A TURRET LATHE W/12" BORE * NICE!

      WARNER & SWASEY 4A TURRET LATHE W/12" BORE Year: 1968 Specifications & Description: Square head w/hydraulic pre-selector Powered Bar feed w/Fine and Corse feed 28" Power 3 Jaw Chuck with top jaws and 3 prong power wrench Rapid traverse both aprons Maximum swing over ways 28-1/4" Maximum swing over carriage 22-7/16" Maximum distance from spindle to turret face 80" Reverse feed both aprons ...

    Be the first to get new results like these -